User guide

030-300432 Rev. A 147 February 2005
User Guide
15.4 Remote Access
The following screen will appear if you select Remote Access from the Maintenance menu. To enable Remote
Access, type in a password and click the enable remote access button.
NOTE: The password should be at least 4 characters long and should not exceed 32 characters. Do not type a blank
space or asterisks in the Password field. The password is also case sensitive.
User Name Displays your current User Name (Static field)
Password Field for entering your password
Timeout This is time the remote access session can be inactive before it will be disabled. The
Timeout is ignored if Disable Timeout is enabled.
Disable Timeout When this checkbox is checked, the remote access timeout will be disabled.
Enable Remote Access When this checkbox is checked, and you are connected to the internet, remote access
will be enabled. When this checkbox is NOT checked, remote access will be
disabled.
Remote URL Displays the IP address of the remote management Router.