User guide

030-300432 Rev. A 148 February 2005
User Guide
The following screen shows a check mark in the Enable Remote Access box, and displays a message that the
remote access is currently enabled. After 20 minutes of inactivity, or on reboot, remote access will be automatically
disabled. To disable remote access, click the Enable Remote Access box to uncheck the box. Click apply to save
the settings.
15.5 Update Device
The following screen will be displayed if you click on Update Device from the Maintenance menu. This screen is
used to update the firmware that controls the operation of the Router. The updated firmware may be loaded from
either a file that is located on your PCs hard drive or from update files stored on an Internet server.
NOTE: The configurable settings of your Router may be erased during the update process.