User guide

030-300432 Rev. A 161 February 2005
User Guide
16.3.3 WAN VC Statistics
The following settings will be displayed if you select Statistics > WAN VC from the Troubleshooting menu.
NOTE: If the Router is configured using ETHERNET PORT 1, the following screen will not be available.
VPI/VCI Displays the VPI/VCI values obtained from your Internet Service Provider.
In Errors The number of error packets received on the ATM port.
In Discard Packets The number of discarded packets received.
In Non Unicast Packets The number of non-Unicast packets received on the ATM port.
In Unicast Packets The number of Unicast packets received on the ATM port.
In Octets The number of bytes received on the ATM port.
Out Errors The number of outbound packets that could not be transmitted due to errors.
Out Discard Packets The number of outbound packets discarded.
Out Non Unicast Packets The number of non-Unicast packets transmitted on the ATM port.
Out Unicast Packets The number of Unicast packets transmitted on the ATM port.
Out Octets The number of bytes transmitted on the ATM port.
MTU Maximum Transmission Unit -The number of data bytes contained in the ATM frame.
Interface Type A unique identifier that represents the interface type.
Interface Description A description field that refers to the interface type.