User guide

030-300432 Rev. A 164 February 2005
User Guide
16.4 Status
NOTE: If you are using Router Model 328W10 or 328W11 and the Router is configured for ETHERNET PORT 1,
the QOS option will not be displayed in the drop-down menu. You must configure the Router for DSLATM PORT
to access QOS in the Advanced WAN drop-down menu. Refer to section 13.6.3.1 for details on enabling and
disabling DSLATM PORT and ETHERNET PORT 1.
16.4.1 LAN Devices
The following settings will be displayed if you select Status > LAN Devices from the Troubleshooting menu.
Devices on LAN
IP Address Displays the IP network address that the Router is on.
MAC Address Media Access Controller (MAC) address of this device.
Name Displays the ASCII (text) name of the devices connected to the LAN.
Status Displays the status of the devices connected to the LAN.