User guide

030-300432 Rev. A 27 February 2005
User Guide
8. Windows 98 SE: Figure 12 may pop up, depending on how Windows 98 SE was installed on the computer. The
installation of the Westell Router requires files that are supplied by Microsoft for Windows 98 SE. If Figure 13
pops up, insert the Windows 98 SE Operating System CD into the computers CD-ROM drive, wait a moment for
the CD to be recognized by the system, and then click on OK. The system should find the required files on the
Windows 98 SE CD-ROM and automatically complete the installation.
Figure 12. Windows 98 SE
If the Operating System CD is not available, or if Figure 12 pops up again, you will have to manually specify the
location of the files. The required files may be stored on your hard drive. A common location for these files is
"C:\Windows\Options\Cabs." Try specifying this path or the path to your CD-ROM drive (usually "D:\") by clicking
the Browse… button in the Insert Disk screen (Figure 13). When you have specified the correct path, click on OK.
The system will begin copying the files.
NOTE: It is very important that the Windows 98 SE files be installed. Do not click on Cancel or S
kip File in the
dialogs, doing so will result in an improper installation and the Router will not function correctly.
Figure 13. Windows 98 SE