User guide

030-300432 Rev. A 34 February 2005
User Guide
6. Windows 2000: When the System Settings Change screen appears, the USB drivers are installed properly
(Figure 27). Click Yes.
Figure 27. Windows 2000
Congratulations! You have completed the software installation for the USB drivers. After you have finished
installing the USB drivers, you must return to section 6.4.4 (Installation via USB) to complete the installation
instructions.
7.5 Installing the USB Driver for Windows XP
IMPORTANT: Confirm that the CD-ROM provided with the Router kit is inserted in the
appropriate drive before continuing this installation.
1. Windows XP: After you connect the Router to your PC, the following screen will appear. (Figure 28). Select
Install the software automatically (Recommended). Click Next.
Figure 28. Windows XP
!