User guide

030-300432 Rev. A 40 February 2005
User Guide
If you changed the VPI/VCI settings and clicked done in the SET-UP COMPLETE screen, the following pop-up
screen will appear. Click OK.
NOTE: The following pop-up will appear only if you have changed the VPI, VCI, or Protocol values in the
preceding screens. If you did not change any of these values, this pop-up screen will not appear and the Router will
not be reset. If your Router’s connection setting is set to “Always On” and you have changes any of these values, the
Router will reset automatically. For instructions on editing your connection settings, see section 11.2.
If you clicked OK in the pop-up, the following screen will be displayed. The Router will be reset and the new
configuration will take effect. Next, proceed to section 8.2 to confirm your DSL sync.