User guide

030-300432 Rev. A 63 February 2005
User Guide
13.2 Service Configuration
The following settings will be displayed if you select Services from the Configuration menu.
Westell has developed an extensive list of NAT services and you may select any service from this list. By selecting
your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on the Router are
open and that the required application traffic can pass through your LAN. For a list of supported services, go to
section 17 (NAT Services).
NAT Profiles allow you to create specific service settings. The NAT profile may then be associated with a
connection profile, allowing you to customize profiles for specific users. For example, if you want to attach specific
NAT services to a profile, or if you want to set up a different connection setting for a profile, you can create new
NAT profiles and customize them to your preference.
NOTE: You may create up to four NAT profiles and attach an unlimited number of services to each profile.
Current Profile Displays the NAT (Network Address Translation) services that you have selected.
Service Name Drop down selection menu of NAT (Network Address Translation) service you can
select to configure your Router.
UPNP Enable Factory Default = Disable
Enabling UPNP (Universal Plug and Play) allows automatic device discovery by
your operating system.