User guide

030-300432 Rev. A 70 February 2005
User Guide
13.2.4 Adding NAT Services to a Profile
This section explains how to add NAT services to your NAT service profile. Remember, you may attach an
unlimited number of NAT services to any profile.
NOTE: Westell has developed an extensive list of NAT services and you may select any service from this list. By
selecting your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on the
Router are open and that the required application traffic can pass through your LAN. For a list of supported NAT
services, go to section 17 (NAT Services). IPSEC ALG is the Router’s factory default NAT service.
To add a NAT service, select Services from the Configuration menu. Next, Select a NAT service from the options
provided at the Service Name drop-down arrow.
NOTE: You can attach multiple NAT services to your profile. However, for each NAT service that you attach to
your profile, you must first select the new NAT service. Then, you must load the new NAT Configuration, as
explained in section 13.2.2 (Creating a New NAT Service Profile).
In the following screen, “Default’ has been selected at the Current Profile that will host the desired NAT service.
However, you can attach a NAT service to any profile.