User guide

030-300432 Rev. A 78 February 2005
User Guide
13.4 Wireless Configuration (Models 328W10, 328W11)
13.4.1 Wireless Basic
The following fields will be displayed if you select Wireless > Basic from the Configuration menu. If you change
any settings in this screen, you must click save to save the settings.
IMPORTANT: If you are connecting to the Router via a wireless network adapter, the service set ID (SSID) must be
the same for both the Westell Router and your PC’s wireless network adapter. The default SSID for the Router is the
serial number of the unit (located below the bar code on the bottom of the unit and also on the Westell shipping carton).
Locate and run the utility software provided with your PC’s Wireless network adapter and enter the SSID value. The
PC’s wireless network adapter must be configured with the SSID (in order to communicate with the Router) before you
begin the Router’s account setup and configuration procedures. For privacy, you should change the Network Name
(SSID) value in the Wireless Configuration screen to your desired value.