User guide

030-300432 Rev. A 83 February 2005
User Guide
13.4.3 Wireless MAC Filter Table
The following screen will be displayed if you select Wireless > MAC Filter from the Configuration menu.
To enable MAC Address filtering, click the box adjacent to Enable MAC Address Filtering. A check mark will
appear in the box. Next, click save to save the setting. To add or edit a MAC Address setting, click the add button.
If you clicked save in the Wireless Filter Table screen, following pop-up screen will be displayed. Click OK to
continue.
If you clicked add in the Wireless Filter Table screen, the following screen will be displayed. Enter the appropriate
values for your MAC Address settings, and then click save to save the settings. Click cancel in this screen if you do
not wish to add MAC Address setting.
Traffic Allowed: When the MAC Filter is enabled, only stations in the MAC Filter Table
(which are set to “Allowed”) will have access to the AP.
Blocked: This allows the station to remain in the table, but no access to the Router
is allowed.
MAC Address The MAC address assigned to the station that you want to allow access to.
Station Name The station name or description that the MAC address is assigned to. This is an
optional field that is useful in identifying the station.