User guide

030-300432 Rev. A 97 February 2005
User Guide
If you clicked the Public LAN Enable box, the following screen will be displayed, showing the Public LAN Enable
box selected. Click on save.
If you selected Public LAN Enable, or if you made other changes in the Public LAN Configuration screen and
clicked save, the following pop-up screen will be displayed. Click OK to save the new settings. If you click on
Cancel, your new settings will not take effect.
NOTE: DHCP Lease Time is displayed in the following format: (dd:hh:mm:ss)*. This value must be greater than 10
seconds. The default = 01:00:00:00. Seconds must be between 0 and 59, minutes must be between 0 and 59, and
hours must be between 0 and 23.
*(dd = days, hh = hours, mm = minutes, ss = seconds).
If the settings you have entered in the Public LAN Configuration screen are incorrect, the following warnings
messages may be displayed via pop-up screens. If this occurs, check settings in the Public LAN Configuration
screen.