User guide

030-300432 Rev. A 99 February 2005
User Guide
13.5.7 VLAN
The following settings will be displayed if you select Advanced LAN > VLAN from the Configuration menu.
VLAN Enable Factory Default = DISABLED
If this box is check, VLAN will be Enabled. This will allow VLAN
tagging to occur according to the data port’s configuration.
LAN Port This allows you to select the LAN port that you wish to configure.
Possible response:
Ethernet Port 1
Ethernet Port 2
Ethernet Port 3
Ethernet Port 4
USB Port*
WLAN Port
VLAN ID This allows you to assign a VLAN ID to the port.
Possible response:
1 through 8
VLAN Priority This allows you to set the VLAN priority for the port.
Possible response:
0 through 7
Outgoing VLAN Tag This allows you to keep or remove the VLAN tag on the port when data is
outgoing.
*USB Port is available in Models 7400 and 328W10 only.