User's Manual

Rechargeable Transponder TXLI-03 Instruction Manual
The rechargeable transponder TXLI-03 operates using an internal non-removable battery. There
are two LEDs, one green and one red on the transponders. When the transponders are fully
charged and operational they will operate for approximately 7 days. The green LED will blink
rapidly every 3 seconds. The number of rapid blinks indicates the approximate number of days
of charge left before the transponder will shut off. When the transponder is on the last day, it
will begin to blink the red LED once ever 3 seconds.
Fig 1 Rechargeable Transponder TXLI-03
Rechargeable transponders are mounted on vehicles using one of two types of holders. One type
of holder is a plastic holder with two wings for bolting to a vehicle. The other type is a nylon
fabric pouch variety with wings for bolting to a vehicle. Note: Be sure to securely fasten the
transponder to the vehicle before use. Unsecured transponders can be hazardous if they
fall on the track.
The best possible orientation of the transponders is shown below in Fig 2. It is important that
the transponder has no metal or carbon fiber between it and the track surface. Metal and
carbon fiber will block the signal emanating from the transponder and the system will not be able
to pick up crossing transponder.
Fig 2 Orientation
The label side should be readable and in upright
direction. No metal should be between the transponder
and the track surface.
This is a poor orientation and
will result in inconsistent
p
erformance.

Summary of content (4 pages)