ASSEMBLY INSTRUCTIONS Linen Fabric Tufted Upholstered Dining Chair 1/3
Hardware: F×1 B×8 A×8 D×4 C×1 Parts list: E×4 Back G×2 Φ8 Φ8 Flat washer Lock washer M8x55MM M8x60MM Shorter Screw Longer Screw M8 Allen key H×2 Hind Legs Front Legs 1 G Put chair back on a clean flat surface. Align Hind legs in the seat pad as shown in the diagram. C DBA 60% Using SHORTER SCREW (D) with Washer (#A,B). D B DO NOT FULLY TIGHTEN. A First HAND tighten then tightened using key up-to 60-80% only at this stage.
Put chair in the upright position and SIT ON THE CHAIR to press downwards on the seat pad ensuring that all 4 feet touch the ground and chair is leveled. Proceed to tighten all screws making sure the chair remains level when tightening. Check that all screws are tight on a regular basis to ensure chair remains level and secure. Also you can using adjustable feet to keep four legs level .
