Replacement Part List

12
UNPACKING
UNPACKING THE PRESSURE
WASHER
!
CAUTION
Always have assistance when lifting
the pressure washer. The pressure
washer is heavy; lifting it could cause
bodily harm.
!
Avoid cutting on or near staples to
prevent personal injury.
The following tools are required:
x Box cutter or similar device
x 8 mm wrench
x 17 mm wrench
1. Carefully cut the packing tape on top of the carton.
2. Fold back top fl aps to reveal the owner’s manual.
Remove owner’s manual and save it for reference.
3. Carefully cut two sides of the carton to remove the
pressure washer.
COMPONENTS
Verify the contents against the list below. If any
parts are missing, please locate an authorized
Westinghouse dealer at www.westpropower.com or call
1-855-WHHELP1 (1-855-944-3571).
1
2
4
5
6
7
3
Figure 3 – Unpacking
1 - High-Pressure
Hose (1)
2 - Spray Wand (1)
3 - Upper Handle
(1)
4 - Nozzles (4)
5 - Soap Hose (1)
6 - Spray Gun (1)
7 - Wheels (2)
OTE: N A 0.6-liter bottle of SAE 10W30 oil is also
included. Soap reservoir is not included.
1
2
3
4
5
8
9
10
11
6
7
Figure 4 – Hardware
1 - Hose Bracket (1)
2 - Spray Gun
Bracket Bolts
M6 x 45 mm (2)
3 - Spray Gun
Bracket Nuts
M6 (2)
4 - Handle Knobs (2)
5 - Wheel Axle Flange
Bolts M12 x
105 mm (2)
6 - Hose Bracket Bolts
M5 x 10 mm (2)
7 - Hose Bracket Nuts
M5 (2)
8 - Serrated Flange
Nut M12 (4)
9 - Spray Gun
Bracket
10 - Upper Handle
Bolts (2)
11 - Spare Parts:
High-Pressure
Hose O-Rings (2)
Inlet Screens (2)