Warranty

Page 10
SET UP & USE
USING THE CAN DISPENSER STORAGE
Your refrigerator is equipped with a convenient can storage. The compartment will
hold up to ve cans. Simply load the cans from the top. To dispense a can, simply
draw one out from the bottom.
REPLACING THE INTERIOR LIGHT BULB
1. Use a Phillips Head Screwdrivers remove the single screw.
2. Gently press down on the plastic tab on the clear light cover to remove.
3. Unscrew and remove old bulb. Insert new bulb.
4. To replace light cover, insert the tab at the end of the cover into the hole and
gently snap in place. Re-insert the screw and tighten.
DOOR ALIGNMENT
Freezer Door: (see Fig. #1)
1. Remove the top hinge cover.
2. Loosen the top hinge screws using a phillips head screwdriver.
3. Adjust the door or put a spacer in between and then tighten the screws.
4. Replace the top hinge cover.
WARNING
Before changing the light bulb, set temperature control to
“0” and unplug the unit from the wall receptacle.