Owner's Manual

12
UNPACKING
UNPACKING THE
GENERATOR
!
CAUTION
Always have assistance when lifting
the generator. The generator is heavy;
lifting it could cause bodily harm.
!
Avoid cutting on or near staples to
prevent personal injury.
Tools required – box cutter or similar device.
1. Carefully cut the packing tape on top of the carton.
2.
Fold back top flaps to reveal the manual and EZ
Start instructions sitting on top of the unit. Remove
both documents and save them for reference.
3. Remove the Wheel Kit Accessories cardboard box.
4. Carefully cut two sides of the carton to remove the
generator.
WHEEL KIT ACCESSORIES
BOX
Open the Wheel Kit Accessories box and verify
the contents against the list below. If any parts are
missing, please locate an authorized Westinghouse
Generator dealer at www.westpropower.com or call
1-855-WHHELP1 (1-855-944-3571).
Components:
Wheels (2)
Handles with Grips (2)
Tool Bag (1)
Spark Plug Socket
Wrench (1)
One Liter Bottle of
SAE 10W30 Oil (1)
Mounting Foot (1)
Oil Funnel (1)
1
2
3
4
5
Figure 3 – Wheel Kit Hardware
1 - Clevis Pin
50 x 10 mm
(2 used)
2 - Flange Bolt
M6 x 18 mm
(2 used)
3 - Wheel Axle Pin
16 mm x 105 mm
(2 used)
4 - Locking Flange
Nut M6 (4 used)
5 - Hairpin Cotter
(4 used)