Owner's Manual

23
OPERATION
2. Move the fuel shutoff valve to the ON position (see
Figure 15).
Figure 15 – Fuel Shutoff Valve in the ON Position
3. Move the choke lever to the ON position (see
Figure 16).
Figure 16 – Choke Lever
4. Push the engine control switch into the RU
N
position (see Figure 17).
Figure 17 – Engine Control Switch
5. Firmly grasp and pull the recoil handle slowly until
you feel increased resistance. At this point, apply a
rapid pull while pulling up and slightly away from the
generator (see Figure 18).
Figure 18
6. As the engine starts and stabilizes, gradually move
the choke lever back to the OFF position.