Full Product Manual

Westinghouse Outdoor Power Equipment - 10
HOW TO POWER DC APPLIANCES WITH THIS PRODUCT
1. Connect the power cable plug of the electrical appliance to USB
outlets or 12V port.
2. Pressthe“DCPowerON/OFF”buttontoturnon.Thebuttonwill
illuminate when it is on.
3. The LED Display will display real-time wattage of the appliance.
4. Whennished,press“DCPowerON/OFF”toturnoDCpower.(If
thereisnoDCpoweroutputfor30stheDCpowerwillturno.)
NOTICE: If the total output exceeds the wattage output of the DC outlet,
thepowerstationwillautomaticallyshuto.Pleaseensurethepower
consumption is less than what the outlet is rated for before using the device.
QUICK CHARGE OUTPUT: This product supports Type-A QC3.0 and
Type-C PD that output 5V/3A, 9V/2A, and 12V/1.5A, for smart devices. The
actual output voltage and current depend on the smart devices, it can be
obtained by consulting the smart device manufacturer.
12V 6MM OUTPUT: The device comes with a 12V cigarette lighter adapter
for 6mm port. This can output 9-12.6V DC, up to 10A. If you plan on using
the6mmoutletwithoutadapterpleaseconrmwhetheryourDC12V
appliance supports charging with a 6mm DC plug (The diameter of the DC
port of the product is 6 mm).
HOW TO USE THE FLASHLIGHT
1. Press Flashlight ON/OFF button once to turn light on
2. Press button again to make light 50% brightness
3. Pressathirdtimetoturnlighto
SOS MODE:Whilethelightison,holddownashlightbuttonfor3
secondstoactivateSOSmode.SinglepresstoturnSOSmodeo.
WARNING: Do not look directly into the light. May cause damage due
to the strong light.
LOCKING/UNLOCKING UNIT
This unit is lockable to prevent accidental battery discharge.
Unlock Mode: To unlock, hold down the AC and DC buttons for 5 seconds
until“OPE”showsondisplay,thenrelease.Allfunctionswillnowwork.
Lock Mode:HolddownACandDCbuttonsfor5secondsuntil“LoC”
shows on display. All functions are locked.