User Manual

ENGLISH INSTRUCTIONS
6
WARNING! Before cleaning or servicing the Dehydrator, make
sure it is unplugged and the Power Switch is set to the “OFF”
position.
CLEANING INSTRUCTIONS
Clean the Trays and inside of the Cabinet before using the Dehydrator for the rst
time and after each use.
1. Set the Power Switch to the “OFF” position. Disconnect the electrical cord
from the outlet.
2. Allow the Dehydrator to completely cool before cleaning.
3. Remove the Trays from the Dehydrator Cabinet.
4. Wipe the Dehydrator Cabinet clean (inside and out) with a damp sponge or
soft washcloth. Be careful not to splash water onto the Heating Element (located
behind the Screening and the Fan in the back of the Cabinet) while cleaning the
inside of the Cabinet. Water could damage the Heating Element and increases
the risk of electric shock. DO NOT immerse the Dehydrator in water.
5. Clean the Dehydrator Trays with warm, soapy water. Rinse with clear water
and dry immediately.
GROUNDING
This appliance must be grounded while in use
to protect the operator from electrical shock.
The appliance is equipped with a 3-conductor
cord and a 3-prong grounding type plug to t
the proper grounding-type receptacle. The
appliance has a plug that looks like Figure
A. An adapter, Figure B, should be used
for connecting Figure A plugs to two-prong
receptacles. The grounding tab which extends
from the adapter must be connected to a
permanent ground such as a properly grounded
outlet box as shown in Figure C using a metal
screw.
EXTENSION CORDS
Use only 3-wire extension cords which have
3-prong grounding-type plugs and a 3-pole
cord connector that accepts the plug from the
appliance. Use only extension cords having
an electrical rating not less than the rating of
the appliance. Do not use damaged extension
cords. Examine extension cord before using and
replace if damaged. Do not abuse extension
cord and do not yank on any cord to disconnect.
Keep cord away from heat and sharp edges.
FIGURE A
FIGURE B
FIGURE C
Circuit
Grounding
Conductor
Grounding
Prong
Metal
Grounding
Screw
Cover of
Grounded
Outlet Box
Grounding
Means
AA2220
GROUNDING INSTRUCTIONS