MANUAL EN RGB LED RING SHIELD FOR MICRO:BIT WPSE475 whadda.
Introduction To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
Product overview Make your Micro:Bit projects shine even brighter! The Whadda RGB LED Ring Shield integrates 26 full-color RGB LEDS, a microphone and a passive buzzer into a shield that easily connects to your Micro:Bit, by using only 5 screws. The shield is fully compatible with the Micro:Bit makecode blocks editor which makes it a breeze to program.
Connecting the shield to your Micro:Bit board Use the 4 included screws and threaded inserts to mount your micro:bit to the RGB LED ring shield, as shown below: 4
You can download the example micro:bit® program by going to the official Whadda github page: https://github.com/WhaddaMakers/RGB-LED-ring-shield-for-MicroBit 1. Click the “Download ZIP” link in the “Code” menu: 2. Unzip the downloaded file. 3. Go to makecode.microbit.org and start a new project 4. Drag the example_code.hex file that is located in the folder you unzipped to the empty makecode blocks workspace. The sample code blocks should appear on your screen: 5. Upload the code to your micro:bit.
whadda.com Modifications and typographical errors reserved - © Velleman Group nv. WPSE475 Velleman Group NV, Legen Heirweg 33 - 9890 Gavere.