Instructions

5
You can download the example micro:bit® program by going to the official Whadda github page:
https://github.com/WhaddaMakers/RGB-LED-ring-shield-for-MicroBit
1. Click the “Download ZIP” link in the “Code” menu:
2. Unzip the downloaded file.
3. Go to makecode.microbit.org and start a new project
4. Drag the example_code.hex file that is located in the folder you unzipped to the empty
makecode blocks workspace. The sample code blocks should appear on your screen:
5. Upload the code to your micro:bit. Make sure to use the built-in USB connector of the
micro:bit to connect to your pc.
6. Once the program has been uploaded to the micro:bit, unplug the USB cable from the built-
in USB connector of the micro:bit, and plug the cable into the micro-USB connector of the
RGB LED ring shield labeled “POWER”. Turn on the power switch on the RGB LED shield.