Manual
3
Congratulations on the purchase of your WX series professional power amplier. Wharfedale Pro WX ampliers are the
result of many years of experience in the use, design and manufacture of professional audio equipment.
We take great pride in engineering and building every Wharfedale Pro product and wish to thank you for entrusting us
with your sound.
From the time Gilbert Briggs built his rst loudspeaker in 1932, to the present day, Wharfedale have maintained the same
standard of quality in components, workmanship and performance.
Please take the time to read this manual completely in order to ensure that you get the most from your WX power
amplier.
INTRODUCTION
Suitable for portable sound reinforcement or xed installations, the series features 2 models that deliver between 300W
and 500W per channel into a 4 ohm load in a rugged 2U, 19” rackmount enclosure. An advanced SMPS (Switched Mode
Power Supply) and Class AB topology deliver high power with low distortion in a compact and lightweight form factor.
A full suite of protection includes thermal, over and under voltage, over-current, DC, short circuit protect and power on/off
mute. The WX Series features XLR inputs and link outputs with a maximum input level of +22dBu allowing integration
with any typical professional audio system. A variable speed fan keeps the amplier rack quiet when not in use. The
WX series features a built in in switched 100Hz LPF/HPF on each channel, allowing the amplier to drive a bi-amplied
system without any external processing.
ABOUT THE WX SERIES
• SMPS - Lightweight and Efcient
• Class AB Topology amplier modules - For Great Sound Quality and Reliability
• Internal LPF/HPF/Fullrange Filtering
• Speakon Outputs
• Internal Circuit Breaker With Reset Switch
• Ultra Quiet Variable Speed Fan
• XLR Inputs and Parallel Wired Thru Outputs
• Front Panel Input Trim Controls
• Signal, Peak, Power and Protect LED Indicators
• Road Ready 2U Chassis
• IEC Mains Input Receptacle
FEATURES
WX-1 and WX-3.indd 3 2014-7-16 10:23:16