User guide
XO
2
IMPORTANT WARNINGS & SAFETY INSTRUCTIONS
1. READ ALL INSTRUCTIONS – carefully and become familiar with the features and functions of
these products before operating them.
2. RET
AIN THESE INSTRUCTIONS – for future reference.
3. COMPLY WITH ALL WARNINGS – All warnings and instructions for this product should be
adhered to.
4. U
SE WITH AMPLIFIERS – In order to avoid damage to drivers and other equipment, it is
advisable to establish and follow a routine for powering up and powering down a sound system.
With all system components connected, turn on source equipment (mixers, signal processors,
record and playback units, etc.) BEFORE powering up amplifiers. Transient voltages from
powering up source equipment can damage speakers if amplifiers are already turned on.
Make sure that amplier volumes are set to their minimum settings and power up any system
amplifiers LAST. It is recommended that all system components be allowed to stabilize for
several seconds before any source signals are introduced or level setting adjustments are
made. Similarly, when shutting systems down, turn all ampliers off rst, before powering down
any other system components.
5.
SER
VICE – There are no user serviceable parts inside this product. Users should not attempt to
service this product. Warranty nullication could result if this is attempted.
XO-series User Manual.indd 3 2009-8-11 16:43:45