Owner's Manual
Important
Safety
Information
Before installing this product read all these instructions!
~
This symbol indicates that there are important operating and maintenance instructions
in
the
literature
~
accompanying this unit.
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
Before making any connections, switch
all
the units
in
your system
off
at the mains.
Set the volume control at minimum when you switch on your system or change sources, and turn
the
level
up
gradually.
DO
NOT
use your amplifier at
full
volume.
Ensure that all loudspeakers
in
the system are correctly wired.
DO
NOT
subject your loudspeakers
to
excessive cold, heat. humidity or sunlight.
Loudspeakers should
not
be
placed directly facing other hi-fi units. or share the same shelf or cabinet.
DO
NOT
place heavy objects on
top
of
loudspeakers.
Some manufacturers forbid
the
placing
of
objects on
top
of
their TV sets. Check your TV handbook before installing the speaker directly on your
TV set. Consult your TV dealer
if
you are
in
any doubt.
DO
NOT
connect speaker terminals
to
the mains supply.
DO
NOT
dismantle the loudspeaker. There are no user serviceable parts inside
it
and you
will
void the warranty by doing so.
Refer all servicing to qualified service personnel. Servicing
is
required when
the
apparatus has been damaged
in
any way,
the
apparatus has
been exposed
to
rain or moisture, does
not
operate normally, or has been dropped.
Caution: Changes or modifications
not
expressly approved by the manufacturer could void the user's authority to operate this device.
Unpacking
Your
Loudspeaker
DIAMOND
12
loudspeakers
come
in
different shapes and sizes. If you are unpacking a floor stander, please remember that these units are heavy.
We
suggest that you have someone
to
assist you.
Lift the loudspeaker carefully
out
of
the packing.
DO
NOT try and lift the loudspeaker using the protective bag.
Unpack the accessories carefully.
If there
is
any sign
of
damage or if the contents are incomplete, report this to your dealer
as
soon
as
possible.
Retain the packing for future safe transport
of
the product. If you dispose
of
the packing,
do
so with respect
to
any recycling provisions
in
your area.
Attaching
the
Spikes
to
Floorstanding
Models
-
012.3,
012.4
Make sure you have plenty
of
unobstructed working space.
Place a soft cloth on the floor
to
protect the loudspeaker.
Invert the loudspeaker onto
the
cloth.
Thread a locknut onto each spike and loosely rub it
up
the thread.
Thread
the
spikes into the spike inserts. Tighten them with finger tight.
Invert the loudspeaker. Be careful
not
to
damage
the
floor with the spikes.
Levelling
the
Loudspeakers
When the speaker
is
upright: You
will
probably find that
the
speaker
will
wobble
with one spike
not
contacting
the
floor. Adjust this spike until
all four spikes are
in
contact
to
the
floor.
With the aid
of
a spirit level
move
each spike
in
and
out
until the loudspeaker
is
level and sitting squarely on all four
~------~
spikes without rocking.
Now
tighten each locknut securely against
the
collar
in
the plinth
to
secure the spike.
Screw
in
rubber
feet
are provided for use on
wood
or stone floors etc. and should be attached
in
the same manner
as
the spikes.
Spike