User guide

WHEATHEART - POST POUNDER 7. STORAGE
HIGH & HEAVY HITTER AND HIGH & HEAVY HITTER PLUS
IM4 R3 35
7.Storage
POST POUNDER STORAGE
To ensure a long, trouble-free life, the following procedure should be followed
when preparing the unit for storage after the season’s use.
• Lock out all power:
• Store the machine on a level surface, free of debris, and in an area away
from human activity. Store in a dry place, or use a tightly secured tarp to
protect the equipment from the weather.
• Ensure that the unit is in transport position.
• Remove all residual material and clean the machine thoroughly.
• Inspect the unit at stress points for cracks.
• Repair or replace any worn or damaged components to prevent any
unnecessary downtime at the start of the next season.
• Touch up paint nicks and scratches to prevent rusting.
• Check hydraulic fittings, hoses, lines, couplers, and valves. Tighten any
loose fittings. Replace any hose that is badly cut, nicked, abraded, or is
separating from the crimped end of the fitting. Secure the hoses to the
machine.
• Inspect and tighten all fasteners; replace fasteners if required.
• Grease all zerks on machine. Do not grease plastic slides or mast rails.
• Inspect mast cylinder head nut (Figure 7.1) and other hydraulic cylinders
for leaks. Replace seals if necessary.
• See engine manual for storage instructions for the engine model units.
• On pounders equipped with a water spike kit, drain all water from the sys-
tem to prevent damage.
• Check tire inflation.
• Retract all cylinders or grease exposed shafts.
Warning: Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.