Instruction for Use

Fast freezing
This function must be activated before freezing fresh food. To activate the function, press the button
until the fast freeze symbol appears. The function is automatically deactivated after 24 hours, or manually
by pressing again the button.
Vacation
This function deactivates the refrigerator compartment if the user is going away for sometime.
This function can be activated or deactivated by pressing the button: The relevant icon will come on
and the displayed temperature of the refrigerator compartment will be replaced by a dash. To reactivate
the refrigerator compartment, repeat the operation.
After activating the function, remove perishable food from the refrigerator compartment and keep the
door closed, since the refrigerator maintains an adequate temperature for preventing the formation of
odours.
Eco Mode
This optional function can be used to save energy.
It is important to remember that this function does not disconnect the appliance from the power supply.
To activate the function press and hold down the “+” and “–” keys of the refrigerator compartment for 5
seconds, until the display switches off completely.
When trying to use the control panel (opening doors or using the water and/or ice delivery control levers)
while this function is on, the display will show the message ECO to warn the user of the current operating
condition.
The ECO function disables the control panel and its warning signals. To reinstate normal operating
condition repeat the same operation until the display shows the previously set temperatures.
ALARMS
In the event of an alarm, the acoustic alarm and indicator lights are activated.
Important: To disable the acoustic signal, press the Alarm Reset button.
Black-out alarm
The alarm black-out activates when a prolonged interruption of the power supply has caused an increase
in temperature in the freezer compartment. The freezer display will flash, showing the maximum
temperature reached in the compartment during the interruption. At the same time, the acoustic signal
will also activate and the and alarm light will flash. To disable the alarm, press the Alarm Reset
button.
Important: Before consuming any food from the compartment ensure that this is still suitable for
consumption.
Door open alarm
The door alarm symbol lights up and the acoustic alarm is activated when one or both doors of the
refrigerator and/or freezer have remained open.
When the doors are left open for more than 2 minutes, the symbol flashes and an acoustic signal sounds.
Operation alarm
The activation of the acoustic alarm and the appearance of a letter code on the display indicates a problem
with the appliance. If this happens, call customer service. You will be asked to provide the letter code
shown on the display instead of the temperature.
11