Ice Maker User Manual

3. Pull out the defrost heater from the evaporator clips holding the heater.

4. Install the new heater to the clips.

5. Make sure that the defrost heater leads are routed properly, and plug the connector into the

wiring harness.

6. Now proceed mounting the evaporator cover.

Repairing / Replacing Evaporator

NOTE: It may be helpful to remove the freezer door if it is hinged on the same side as the

evaporator heat exchanger entrance.

1. Purge the refrigerant from the system.

2. Unplug the unit from the wall receptacle

3. Remove all contents of the freezer.