Instruction for Use

Connect the appliance to a mains power source.

On electronic models, this may cause a signal tone to sound, indicating that the temperature alarm has

been triggered. Press the warning tone shutoff switch. If present, place the antibacterial odor filter in the

fan as illustrated on the filter packaging.

Note: After switching on the appliance, you must wait for 4-5 hours until the correct storage temperature

has been reached for an appliance filled normally.

FIRST-TIME USE

Clean the appliance occasionally with a cloth and a solution of hot

water and a neutral cleaning agent specifically intended for the cleaning

of refrigerator interiors. Do not use any abrasive items or substances.

Using the tool provided (see Fig.), clean drain aperture in back panel

of refrigerator near the fruit and vegetable tray on a regular basis to

assure continuous and correct condensate draining.

Before maintenance and repair work, always disconnect the mains plug

on the appliance or isolate the mains power supply.

Caution: Refrigerator accessories must not be rinsed in the dishwasher.

MAINTENANCE AND CLEANING OF THE

APPLIANCE

If the product is equipped with LED lamps as shown,

contact the Technical Customer Service whenever these

need to be replaced.

LEDs last longer than conventional bulbs, improve

visibility inside the appliance and are environment-

friendly.

REPLACING LEDS