Instruction for Use

6
English
Using the Blender
Preparing the Blender for Use
Before Use
NOTE: While the Blender is on or the
PULSE (
) mode indicator light is blinking:
- Do not interfere with blade movement
- Do not remove pitcher lid
Operating the Blender
The KitchenAid™ Blender has five speeds:
STIR (
) , CHOP ( ), MIX ( ),
PUREE (
), and LIQUEFY ( ). In
addition, it also features CRUSH ICE (
)
and PULSE (
) mode.
1. With convenient one-step operation,
this unit will operate only when a
speed selection button is pressed.
2. Before operating the Blender, make
sure the pitcher is properly secured
in the locking collar and assembly is
positioned on the Blender base.
NOTE: When properly positioned, pitcher
assembly will rest completely on Blender
base. If not, repeat steps 3 and 4.
7. Put lid on pitcher.
8. Plug power cord into a grounded
outlet. Blender is now ready for
operation.
9. Before removing the pitcher assembly
from the base, always press “O” and
unplug the power cord.
Gap
No
Gap
WARNING
Electrical Shock Hazard
Plug into a grounded outlet.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire or electrical
shock.