Instruction for Use

32
GB
LOW TEMPERATURE modes
This type of cooking can be used for proving, defrosting,
preparing yoghurt, heating dishes at the required speed and
slow cooking at low temperatures. The temperature options
are: 40, 65 and 90°C.
PIZZA mode
The top and circular heating elements switch on and the fan
begins to operate. This combination heats the oven rapidly.
If you use more than one rack at a time, switch the position
of the dishes halfway through the cooking process.
ECO mode
The rear heating element and the fan are switched on,
thus guaranteeing the distribution of heat in a delicate and
uniform manner throughout the entire oven. This energy
saving mode is suitable for cooking small dishes, reheating
meat and nishing off cooking processes.
SUCCESS cooking modes
! The temperature and cooking duration are pre-set values,
guaranteeing a perfect result every time - automatically. These
values cannot be adjusted and use the C.O.P.® (Programmed
Optimal Cooking) system. The cooking cycle stops
automatically and the oven indicates when the dish is cooked.
You may start cooking whether the oven has been preheated
or not. The cooking duration can be customised according to
personal tastes, modifying it - before the start time - by ±5/20
minutes depending on the selected programme. Once cooking
has begun, it is still possible to modify its duration. If the value
is modied before cooking begins, it is stored in the appliance
memory and suggested again when that cooking mode is next
used. If the temperature inside the oven is higher than the
suggested value for the selected mode, the text “Hot” appears
on the TEMPERATURE display and it will not be possible to
begin cooking; wait for the oven to cool.
! When the cooking stage has been reached, the oven
buzzer sounds.
! Do not open the oven door as this will disrupt the cooking
time and temperature.
BEEF mode
Use this function to cook beef and pork. Place the food
inside the oven while it is still cold. The dish may also be
placed in a preheated oven.
CAKES mode
This function is ideal for cooking desserts which are made
using natural yeast, baking powder and desserts which
contain no yeast. Place the dish in the oven while it is still
cold. The dish may also be placed in a preheated oven.
Using the Small Space and Main Space at
the same time
! Simultaneous operation is only possible when using
CREATION cooking modes.
Starting the oven
For simultaneous use, simply start a cooking mode for both
cavities in succession. The TEMPERATURE display shows
the cooking parameters for both cavities.
! Thanks to the high energy efciency of the appliance, it
only takes around 15 minutes for the SMALL SPACE cavity
to preheat.
Programming cooking
! A cooking mode must be selected before programming
can take place.
Programming the cooking duration
1. Press the
button until the icon and the numerical
digits on the display begin to ash.
2. Turn the TIMER knob towards “ ” and “ ” to adjust the
time as desired; keep the knob in position to scroll through
the numbers more quickly and make the setting process
easier.
3. Once you have reached the desired duration, press the
button again. The display will show the duration and
set temperature alternately.
4. Press the
button to begin cooking.
5. When cooking has nished, “END” appears on the display
and a buzzer sounds.
• For example: it is 9:00 a.m. and a duration of 1 hour and
15 minutes is programmed. The programme will stop
automatically at 10:15 a.m.
Setting the end time for a cooking mode
! A cooking duration must be set before the cooking end
time can be scheduled.
! For the delayed programming to work properly, the clock
should be set to the correct time.
1. Follow steps 1 to 3 to set the duration as detailed above.
2. Press the
button twice: the icon and the
numerical digits on the display will begin to ash.
3. Turn the TIMER knob towards “ ” and “ ” to adjust the
cooking end time value.
4. Once you have reached the desired end time, press the
button again. The display will show the duration, the
cooking end time and the set temperature alternately.
5. Press the
button to activate the programmed mode.
Programming has been set when the and buttons
are illuminated.
* Only available in certain models.