Use and Care Manual

Note: The Self-clean function sanitizes internal waterways. It does not sanitize outside of the faucets

and other external parts of the cooler.

General Cleaning

Perform: As needed (every 6 months under normal conditions)

Time Required: 5 minutes.

Note: Do NOT use abrasive materials or chemical cleaners.

1. Unplug power cord from wall outlet.

2. Clean cabinet surfaces with a soft cloth and warm soapy water.

3. Wipe dust from back of dispenser to improve efficiency.

4. Remove drip tray assembly by sliding it forward. Remove cover. Wash drip tray and grice by hand

with soapy water.

5. Wipe stainless steel parts of the cabinet with unscented baby oil (mineral oil).

PROPER CARE & CLEANING

3. Release control once desired fill level is achieved.

4. For dispensing coffee see instructions for “how to brew coffee”.

Replace an Empty Bottle

Notice: When your bottle is empty the water cooler will beep intermittently.

You may also hear a sucking sound when the bottle empties. This is normal and is another

way to be alerted that your bottle is empty.

Replace empty bottle as soon as you notice it is empty. If unavailable, leave door ajar or

unplug cooler to stop beeping noise and flashing lights.

There may be a small amount of water left in the bottle. This is normal.

1. Open door and slide bottle out.

2. Remove probe from bottle:

3. Install fresh bottle:

with clean wet cloth.