Use and Care Manual

PROPER CARE & CLEANING
General Cleaning
Perform: As needed
Time Required: 5 minutes.
Note: Do NOT use abrasive materials or chemical cleaners.
They may scratch surfaces and contaminate drinking water. For cleaning hard spots suggest
rubbing with toothpaste.
1. Clean the cabinet surfaces using a soft cloth and warm soapy water, then rinse.
2. Wipe dust at the back of dispenser to improve efficiency.
3. Remove the drip tray assembly by pulling it forward. Remove the cover. Place the tray
and cover in the dishwasher or wipe the parts clean using a soft cloth and warm soapy
water.
4. Reattach drip tray assembly.
Cleaning the Cold Reservoir and Water Lines
Perform: Every 3 months or whenever an off-taste occurs.
Time Required: 15 minutes.
Note: Best to do prior to loading a fresh bottle.
1. Unplug the power cord from the wall outlet.
2. Remove the water bottle.
3. Remove the bottle receptacle by turning it counterclockwise and pulling it up.
4. Remove the plastic baffle from inside reservoir. Clean it using warm soapy water, rinse.
5. Fill the reservoir with a mixture of 1 gallon tap water and 1 teaspoon of unscented house-
hold bleach.
Model # 7LIECK-W-WL: Page 12
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-855-5-WHIRL-5 for assistance.
To Remove Bottle
Receptacle
Excessive Weight Hazard
Use two or more people to move and install the
water cooler and the bottles.
Failure to do so can result in back or other injury.
WARNING