Use and Care Manual

Model # 7LIECK-W-WL: Page 9
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-855-5-WHIRL-5 for assistance.
INSTALLING THE CORRECT BOTTLE RECEPTACLE
This model comes with a Probe Receptacle (1). No changes are required. The Probe
will push the Plug out of the way when you place the bottle into the receptacle.
If your water bottle
looks like this
Then use this
bottle receptacle
If your water bottle
looks like this
Then use this
bottle receptacle
1. Remove the bottle receptacle (1) by
turning it counterclockwise and
pulling it up.
2. Remove the collar (2) from the foam
packaging or bag in the front of
dispenser.
3. Align the tabs.
4. Turn clockwise to secure.