Hot, Room & Cold Temperature Water Cooler Model No. : 8LIECHK-SSF-WL User of mineral water please read descaling instructions on the page 12 USER’ MANUAL SAVE THIS MANUAL FOR FUTURE USE The appearance of your product may differ from the above illustration. For service, call: 1-855-594-4755 or E-mail Whirlpool@electrotemp.
Model # 8LIECHK-SSF-WL: Page 2 TABLE OF CONTENTS Safety Precautions-Electrical Requirements ................................... 2 Safety Precautions........................................................................ 3 Product Features ....................................................................... 4 Key Information for Future Use .................................................... 4 Specifications ..............................................................................
Model # 8LIECHK-SSF-WL: Page 3 SAFETY PRECAUTIONS Your safety and the safety of others are very important. We have provided many important safety messages in this manual and your appliance. Always read and follow all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or injure you and others.
Model # 8LIECHK-SSF-WL: Page 4 PRODUCT FEATURES Congratulations! You have chosen a technology advanced, state-of-the-art water cooler. To provide consistently cold water, this water cooler forms an "Ice Bank" in the cold tank. Formation of the initial "Ice Bank" can take up to 1 hour. WHEN THE UNIT IS PLUGGED IN FOR THE FIRST TIME, IT CAN TAKE OVER AN HOUR BEFORE THE "ICE BANK " FORMS AND THE UNIT CAN PROVIDE THE COLDEST WATER.
Model # 8LIECHK-SSF-WL: Page 5 SPECIFICATIONS AC 120V / 60Hz / 6.5Amp R-134A < 100Watts 4 Liters / 1.06 Gallon 4°C/39°F 650 Watts 6 Liters / 1.59 Gallon Constant 90°C/194°F, when auto booster is activated 102.8cm H x 32cm W × 38.2cm D 40.5inch H x12.6inch W × 15inch D 16.2 Kg / 35.7 Ibs Power Supply Refrigerant Type Cold Water Power Cold Capacity / Hour Cold Temperature Hot Water Power Hot Capacity / Hour Hot Temperature Energy Verified Dimensions Net Weight Version 2.
Model # 8LIECHK-SSF-WL: Page 6 UNPACKING AND ASSEMBLY Remove the dispenser from packaging: WARNING TOP TO OPEN: TOP Excessive Weight Hazard TOP TOP Use two or more people to move and install the water cooler and the bottles. Failure to do so can result in back or other injury. 1. Lay the box containing the unit on its side. 2. Open bottom flaps of the cardboard box. 3. Stand cooler upright, with box flaps unfolded. 4. Pull box straight up. 5. Unpack the drip tray and insert it into the dispenser.
Model # 8LIECHK-SSF-WL: Page 7 CLEAN OUT OF THE BOX, NO NEED FOR CLEANING PRIOR TO INITIAL USE Your water cooler is Clean Out of The Box. Cleaning described below is not required. However if you choose to clean your water cooler for any reason, please follow the instructions below. Time Required: 30 minutes. Notice: Unplug the power cord. 1. Remove the air filter and wash it in soapy water. 2. Submerge the probe head in the soapy water and rinse properly. 3.
Model # 8LIECHK-SSF-WL: Page 8 OPERATION IMPORTANT This unit is intended for use with high-quality bacteriologically safe bottled water only. Do NOT use other liquids. Do NOT use for other purposes. Warranty is void if unit is used with any other liquids, including tap water, coffee, tea, juices, beer, or wine. This dispenser has been designed to use with standard water bottles with a 3, 5, or 5.2 gallon capacity. Do NOT use alternative bottles. Initial Set Up Do NOT plug in until steps 1-3 are completed.
Model # 8LIECHK-SSF-WL: Page 9 NOTE: Fit all round bottles. When using a 5 gallon rectangular bottle, slide it into place as shown in the illustration below. • If the probe tube A and B are not sealed(see previous page), the pump will run a few minutes and the night lights will flash. To correct, open the door, re-attach the probe, and close the door. • If the lights continue to flash, your bottle may be empty or there may be an issue with the water tube lines. Call 1-855-594-4755 for assistance. 3.
Model # 8LIECHK-SSF-WL: Page 10 2. Press the right control downward to start dispensing water. 3. Release the control once desired fill level is achieved. Dispensing Hot Water Note: After setup, hot water will be available in 15-20 minutes. 1. Position the container you wish to fill with water securely below below the hot-water tap. • The left triangle below the hot water control indicates the location of the hot water tap (See the "Parts & Features" section on page 5).
Model # 8LIECHK-SSF-WL: Page 11 PROPER CARE & DESCALING General Cleaning Perform: As needed Time Required: 5 minutes. Note: Do NOT use abrasive materials or chemical cleaners. 1. Clean cabinet surfaces with a soft cloth and warm soapy water 2. Wipe dust from back of dispenser to improve efficiency. 3. Remove drip tray assembly by sliding it forward. Remove cover. Place tray and cover in dishwasher or wipe parts clean with a soft cloth and warm soapy water. 4. Reattach drip tray assembly.
Model # 8LIECHK-SSF-WL: Page 12 Step B: Sanitize Probe and Taps 1. In a clean container, make a sanitizing solution of 1.5 gallons of tap water and 1.5 tablespoons of unscented household bleach composition(I.E.5.25% sodium hypochlorite). 2. Wipe the probe and the area around all the taps with a soft cloth moistened with the sanitizing solution. Step C: Sanitize Reservoirs 1. Remove the cap from a spare empty 5 gallon bottle. 2. Fill the bottle with the water and bleach mixture. 3.
Model # 8LIECHK-SSF-WL: Page 13 Step D: Rinse Reservoirs 1. Dispose of the water and bleach mixture and rinse the bottle with tap water. 2. Fill the bottle with tap water and insert the probe into the bottle. WARNING Excessive Weight Hazard Use two or more people to move and install bottles. Failure to do so can result in back or other injury. WARNING Electrical shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord.
Model # 8LIECHK-SSF-WL: Page 14 Descaling If you use mineral water you will need to descale your hot water tank. Heated mineral water will cause minerals to fall out. Eventually they will plug up your waterways, resulting in a gradual slowdown of the flow rate, leaking faucets, and other problems. Descaling Solutions Cooking vinegar is proven to remove calcium deposits efficiently. Depending on the frequency of decalcification treatments, please use the following proportions of White Vinegar.
Model # 8LIECHK-SSF-WL: Page 15 TROUBLESHOOTING Call 1-855-594-4755 for service. Problem: Stainless steel surfaces are smudgy or fingerprinted. Solution: Use paper towel to wipe excess oils until surface feels dry to the touch. • To maintain beauty of stainless steel, oil it periodically using a stainless steel cleaning solution available at hardware stores, or use mineral oil (unscented baby oil). Problem: The buttons for dispensing water are slow-moving or jammed.
Model # 8LIECHK-SSF-WL: Page 16 Problem: Buttons are stuck. Solution: Apply mineral oil (unscented baby oil) to the button slides to reduce friction. Problem: No water is coming from the taps. Solution: Make sure the water bottle is not empty. If it is, replace it. If not, adjust the probe to an appropriate length. • Make sure that you fully press the water controls. • Make sure that the probe connection with the water bottle forms a complete seal. • Make sure that the door is closed.
Model # 8LIECHK-SSF-WL: Page 17 LIMITED WARRANTY Electrotemp Technologies Inc., (“Vendor”) warrants to the original purchaser of this dispenser, and to no other person, that if this dispenser is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in such dispenser shall be free from defects in material and workmanship.
®/™ ©2016 Whirlpool. All rights reserved. Manufactured under license by Electrotemp Technologies Inc., Mississauga, ON. Canada Limted warranty provided by manufacturer. REV.
文件名：说明书 8LIECHK-SSF-WL（Wal-mart)-English 图号：5M010193XW06(E+F) 修 版本号 订 01 修订人 修订内容 1. 第1页，5页，6页，8页，9页，10页，15页，17页饮水导杆变为新二代 2. 第4页增 加电子温控说明 3. 惠而浦要求修改他们的地址 4. Electrotemp 服务电话由888-828-1426变更为1-844-926-6537 5. 第6页部件图下 增加一句电子节能说明 6. 第2页增加“拆开面板，无保修” 7. 第17页水泵带快速接头图有修改 8. 第5页产品尺寸位置有修改，与别款统一, 测试说明 9. 第1页，5页，6页，10页 接近开关 改为门开关, 图号加（E+F） 02 第15页第2大点第小点句子段落有调整 最后一页法律声明部分，在warranty之前加上limited 第2页增加一条安全警告语 03 1. 惠而浦服务电话由1-844-494-4757变更为1-855-594-4755 1. 封面，第4页，第7页，第8页，第14页换成狗腿饮水杆， 1. 第9页，第15页冷水最冷时间由6小时变更为1.
