Instructions / Assembly

Model # 8LIECHK-SSF-WL: Page 15
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-855-594-4755 for assistance.
TROUBLESHOOTING
Excessive Weight Hazard
Use two or more people to move and install bottles.
Failure to do so can result in back or other injury.
WARNING
Electrical shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
serious injury, fire, or electrical shock.
WARNING
Call 1-855-594-4755 for service.
Problem:
Stainless steel surfaces are smudgy or fingerprinted.
Solution: Use paper towel to wipe excess oils until surface feels dry to the touch.
• To maintain beauty of stainless steel, oil it periodically using a stainless steel cleaning
solution available at hardware stores, or use mineral oil (unscented baby oil).
Problem: The buttons for dispensing water are slow-moving or jammed.
Solution: Dust and cooking oils might cause slow moving push buttons. Add mineral oil (unscented
baby oil) between the gaps of buttons to clear dirt.
Problem: Dispenser is not operating.
Solution: Make sure that the power cord is properly connected to a working outlet.
Problem: Water is leaking.
Solution: Replace water bottle. The most common cause of this issue is a cracked bottle. If the
leak remains, unplug unit and call 1-855-594-4755 for assistance.