Instructions / Assembly

Model # 8LIECHK-SSF-WL: Page 16
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-855-594-4755 for assistance.
Problem: Buttons are stuck.
Solution: Apply mineral oil (unscented baby oil) to the button slides to reduce friction.
Problem: No water is coming from the taps.
Solution: Make sure the water bottle is not empty. If it is, replace it. If not, adjust the probe to an
appropriate length.
• Make sure that you fully press the water controls.
• Make sure that the probe connection with the water bottle forms a complete seal.
• Make sure that the door is closed.
Problem: Water dispensed is not cold.
Solution: Note that it takes up to 1 hour after setup to dispense cold water.
• Make sure that the back of the dispenser is at least 4 inches from a wall and that air is
free to flow on all 4 sides of the dispenser.
• Make sure that the cold-water switch is ON.
Problem: Water dispensed is not hot.
Solution: Note that it takes 15-20 minutes after setup to dispense hot water.
• Make sure that the power cord is properly connected to a working outlet.
• Make sure that the hot water switch is ON.
Problem: LED night lights are flashing and the dispenser is making beeping noises.
Solution: Replace the empty bottle. If you cannot replace the empty bottle immediately, leave the
door ajar or unplug the cooler to stop the beeping noise and the flashing lights.
Problem: The dispenser is noisy.
Solution: Make sure the cooler is properly levelled using the two adjustable feet at the back of the
unit.
Problem: Pump is not pumping water into cooler.
Solution: Make sure that tubing is properly inserted into quick connectors on the pump.
Problem: Does the night light in the front of the cooler stay on?
Solution: There is a switch at the top back of the water cooler to turn the LED lights on or off.