User Manual

GB17
Control Panel Description
The control panel is equipped with touch controls: to use them, just press the corresponding symbol (a light touch is sufficient).
First use / after a power failure
After connecting the hob to the electrical power supply, the control panel is locked (the indicator light above the key is ON).
To unlock the control panel, press and hold the key for 3 seconds. The indicator light switches off and the hob can be used normally.
Switching the hob ON/OFF
To switch the hob on, press and hold the key for approx. 2 seconds: the indicator light above the key turns on and hyphens appear inside the circles which represent the
cooking zones.
To switch off, press the same key until the hob switches off. All the cooking zones are switched off.
Switching on and adjusting cooking zones
After switching on the hob, position the pot on the chosen cooking zone.
Activate the cooking zone by pressing the relative round key: the round key displays number which corresponds to the intermediate power level.
To change the power level, move your finger horizontally on the slide touchscreen: the number inside the circle will change with just a quick slide of the finger from a minimum
of 1 to a maximum of 9. You can activate the booster function by pressing “BOOST” on the slide touchscreen (“P” on the display). The “BOOST” power function can be used for a
maximum of 10 minutes, after which the appliance automatically sets the power level at level 9. In models with three cooking zones, three “BOOST” levels can be selected at the
same time: in this case the appliance automatically adapts the power distribution between the three zones.
Switching off cooking zones
Select the cooking zone to be switched off by pressing the relative round key (a dot lights up at the bottom right of the power level indicator). Press OFF on the slide touchscreen.
INSTRUCTIONS FOR USE
The hob automatically switches off if no function is selected within 10 seconds of switching on.
If more than one cooking zone is on, the slide touchscreen allows you to change the power level of the selected zone, indicated by the presence of a luminous
dot at the bottom right of the power level indicator. To select a zone, simply press the relative round key.
If you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions for your induction hob, the message “no pot” will appear in
the display (see figure on the left). If no pot is detected within 60 seconds, the hob switches off.
The cooking zone switches off and, if the zone is still hot, the letter “H” appears in the circle.
“H” is the residual heat indicator. The hob is fitted with a residual heat indicator for each cooking zone; these indicators alert the user when cooking zones are
still hot. When the cooking zone cools down, the display switches off.
MIN.
To select and activate the cooking zones
Hob ON/OFF
To set the minute
counter
To enable the hold
function
To select one of the automatic
functions
Slide touchscreen
To lock the control panel
To select the Flexi cook function
i
In
d
icates t
h
at one o
f
t
h
e automatic
f
unctions is On
Cooking zone timer
Cooking zone selection and selected cooking zone/power level display
Slide touchscreen (power adjustment)