Instruction for Use

HOW TO FILL THE SALT CONTAINER

From a water hardness category of

, before using the dishwasher for the

first time, fill the salt container with regeneration salt (to find out the

hardness level of water in your area, contact your local Water Board or

check the last bill you received). If the water hardness level does not

correspond to position

on the selector (setting on delivery) or if the

water hardness level changes, set the correct water hardness level on the

salt container cap or (according to the model) using system 2 or 3.

System 2:

Press and hold the programme select button and the On/Off button

(the salt level indicator lamp will flash and the indicator lamp /

will light up). To change the set value: press and hold the programme

select button until the required value is reached.

As soon as the required water hardness level is reached, press the

On/Off button.

System 3:

Press and hold the Start button and simultaneously turn the

programme dial one position to the left.

Release the Start button (the salt level indicator lamp will flash and

setting value 2 will be displayed). To change the set value: press the

Start button until the required value is reached.

When the required water hardness value is reached and the indicator

lamps light up, as shown in the table, turn the programme dial to the

“Off” position.

Table of water hardness categories

System 1

°dH °fH °Clarke mmol/l Hardness