Instruction for Use

19
CARE AND MAINTENANCE
Before cleaning or carrying out maintenance, switch off the
appliance, disconnect the mains plug and turn off the water tap.
Cleaning the outside of the appliance:
To clean the outside of the appliance, use a neutral detergent and a
damp cloth.
Clean the control panel with a damp cloth only.
Do not use abrasive detergents.
Cleaning the inside of the dishwasher:
Regularly wipe the door seal and inside of the door with a damp cloth
to remove any food residue.
Upper spray arm:
1.
Slacken the fixing nut (by turning it counter-clockwise) and
detach the spray arm by pulling it down.
2.
Rinse the nozzles.
3.
Remount the spray arm by aligning it with the rotary mounting.
4.
Tighten the fixing nut by turning it clockwise.
The fixing nut must be tightened until it clicks!
Make sure the spray arm rotates freely.
Lower spray arm:
1.
Remove the spray arm by lifting it upwards.
2.
Rinse the nozzles.
3.
Remount the spray arm by aligning it with the rotor pin and insert it.
4.
Push the spray arm down firmly until it is fixed in place.
Make sure the spray arm rotates freely.
396gb94500.fm5 Page 19 Monday, July 9, 2001 3:26 PM