Instruction for Use

19
CARE AND MAINTENANCE
Cleaning the filters:
1.
Rotate the microfilter counter-clockwise (in the direction of the
arrow
“0”
) and extract it (
E
).
2.
Place the microfilter/wide-mesh central filter unit on a flat surface
and push the handle of the microfilter (
F
).
Extract the wide-mesh filter by pushing it forward (
G
).
3.
Remove the fine-mesh filter (
H
).
4.
Clean all filters under running water
, paying attention not to bend
the fine-mesh filter. Check that no impurities are left inside the
dishwasher!
5.
Remounting:
Insert the wide-mesh filter in the microfilter (click should be
heard!) Insert the fine-mesh filter.
The filter must be fitted
under both tongues.
Insert the microfilter/wide-mesh central filter unit and turn
clockwise to lock (in the direction of arrow “1”), until the dashed
lines on the microfilter and fine-mesh filter are aligned.
The filter unit must be correctly assembled to ensure good
wash results!
H
E
G
F