Quick Start Guide

5019 637 33106
I
D
I
F NL E P
GB
GR FINDKNS
The freezer is switched on by means of the thermostat located on the tabletop.
The freezer can operate at ambient temperatures between +16°C and +32°C.
Freezer control panel
Indicator LEDs
1.
Knob of the control.
2.
The green LED indicates that the appliance is connected to the power supply.
3.
The red LED shines or blinks indicating alarm for critical temperature within freezer (it is above -12°C) or damage
sensor of freezer.
4.
The yellow LED lights up when the fast freeze button is pressed or blinks together with red LED indicating damage
sensor of freezer.
5.
Fast freezing (push button) - fast freeze function is selected, yellow indicator lamp 4 switches on.
Freezer internal temperature control
Thermostat set to Min: internal temperature least cold
Thermostat set to Max: internal temperature coldest
Thermostat set to Off: switches off the freezer compartment only (the appliance remains connected
to the power supply).
Recommended thermostat setting: Med position
Alarm signal
N.B.:
Ambient air temperature, the frequency of door opening and the position of the appliance can affect the freezer
internal temperature.
These factors must be taken into account when setting the thermostat.
Signal Cause Solution
Temperature The red LED (3) lights up The internal temperature is
above -12°C
Press button 5 until the
temperature returns below
-12°C again (the red
temperature alarm LED will
switch off).
6gb33106.fm Page 2 Thursday, April 1, 2004 5:27 PM