Instruction for Use

15
Daily cleaning of the oven is recommended for hygienic reasons and to avoid interruptions of
operation.
The design of the WHIRLPOOL ovens allows quick and easy cleaning. The oven chamber is
made of all-welded stainless steel, which makes it splash proof. You will therefore find the
easy-to-use handshower (optional extra), which is located under the front panel, very suitable
for interior cleaning.
The door sealing is easy to remove, which ensures quick and efficient cleaning under and
around it.
Furthermore, the flat front panel makes exterior cleaning simple and efficient.
To give the oven an extra shine, we recommend WHIRLPOOL steel oil which is available from
your oven supplier (0.5 litre: part No. 045650 – 5 litres: part No. 045654).
Oven chamber
Use CombiWash, level 1-4 (note that CombiWash should be ordered as optional extra together
with the oven as it cannot be retrofitted) or the semi-automatic cleaning program (see
Description of functions), or do as follows:
A. Always clean in a cold oven or cool the oven chamber down to below 80°C.
B. Let the oven run in COMBI STEAMING 2 at 80°C for 15 minutes.
C. Apply WHIRLPOOL oven detergent to the sides of the oven chamber, racks, etc. (according
to requirement) using a soft brush or a spray pistol. Protect your face and hands as the
detergent may cause irritation should it come into contact with your skin.
D. Let the detergent work for 10 minutes.
E. Let the oven run in COMBI STEAMING 2 at 80°C for 15 minutes.
F. Rinse the oven chamber with water (using a soft brush or the handshower (optional
extra)).
G. If the oven is not connected to a soft-water plant, we recommend that you use
WHIRLPOOL rinse aid and wipe the oven chamber with a dry cloth.
Cleaning behind filter housing
For thorough cleaning of the oven chamber, move the filter housing so that it becomes
possible to clean round the fan and heating elements.
Loosen the 2 screws (A) and (B) on the filter housing, turn the filter housing and clean behind
it. The filter housing can be dismounted entirely by lifting it upwards till it is clear of the pin at
the bottom and then tipping it.
Cleaning