Quick Start Guide

Description of display and buttons
1. Minute minder with acoustic signal selection button
2. Cooking time selection button
3. End of cooking time selection button
4. Manual mode selection button
5. Set or change data button
6. Set or change data button
Setting the timer and selecting Manual Mode
Following installation or a power cut,
-0:00
and
AUTO
both flash on the display.
Press buttons
2
and
3
at the same time while setting the timer with buttons
5
and
6
.
Press button
4
to select Manual Mode and proceed in this mode.
will light up.
Setting the Minute Minder with acoustic signal
Functions independently of the oven's cooking functions.
Press button
1
to display
-0:00
.
Press button
5
or
6
to display the desired cooking time.
For several seconds the display shows
12:00
and after the buttons are
released.
The acoustic signal sounds at the end of cooking time.
Press button
1
to stop the acoustic signal.
Setting cooking time
Press button
2
to display
-0:00
.
Press button
5
or
6
to set the desired cooking time.
For several seconds the display shows
12:00
and
AUTO
+ after the buttons are
released.
• To adjust the oven turn the thermostat dial to the desired temperature and
the oven will immediately switch on. The acoustic signal sounds to indicate
the end of cooking time and that the oven has switched off.
• To adjust the oven turn the Selector knob to
“0”
, then press button
4
to stop
the acoustic signal.
•Press button
2
to check or change the remaining cooking time.
•Press button
3
to display the remaining cooking time.
Setting cooking time and end of cooking time
Press button
2
to display
-0:00
.
Press button
5
or
6
to set the desired cooking time.
After the buttons are released, the time of day and
AUTO
+ appear on the
display.
•Press button
3
followed by button
5
or
6
to set the desired cooking time.
The symbol switches off and switches back on again when the oven starts
working automatically at the start of the previously set cooking time.
• To adjust the oven turn the thermostat dial to the desired temperature and
select the desired function by turning the Selector dial. The acoustic signal
sounds to indicate the end of cooking time and that the oven has switched off.
• To adjust the oven turn the Selector knob to
“0”
, then press button
4
to stop
the acoustic signal.
AUTO lights up and
remains lit to indicate
Automatic Mode. Flashes
to confirm end of cooking
time.
When the manual
operation light is on, the
oven is operating in
Manual Mode.
When the minute
minder light is on, the
Minute Minder is in use.