Quick Start Guide
First-Last...
shelf positions
1. Control panel
2. Cooling fan* (not visible)
3. Top heating element
4. Oven light
5. Round heating element (not visible)
6. Fan
7. Bottom heating element (not visible)
8. Door hinge
9. Oven cool door
*N.B.:
The cooling fan switches on only when the
oven has reached a certain temperature.
After the oven switches off, the cooling fan may,
however, continue to run for a certain time to
ensure proper cooling.
ACCESSORIES
•Grid
• Drip tray
OVEN FUNCTIONS TABLE
Function
Function
Preset
temperature/
level
Function description
(see details in the user’s manual)
Symbol Nr.
– – OVEN OFF - -
– – OVEN LIGHT - To switch on the oven light.
2
MLTF
(Heat Maintenance)
35C
To keep a constant temperature, either
35°C or 60°C.
3 STATIC 200C
To cook food at one shelf level.
Preheating.
4
PASTRY
(Static + Fan)
175C
To cook on two shelf levels, at the same
temperature.
5 FAN 160C
To cook on more than one shelf level, at
the same temperature.
6 TURBOFAN 160C
To cook: large fruitcakes, stuffed
vegetables, timbales, poultry.
7 GRILL 3 To grill small pieces of meat, toast, etc...
8
TURBOGRILL
(Grill + Fan)
3 To grill large pieces of meat.
9 PROGRAMME P1 To bake pizza, bread, focaccia.
First
Last
Push-Push knobs
• To use this type of knob, press it in the middle.
• Turn the knob to the desired position.
• Once cooking is over, turn the knob back to the position marked by “0” and press it again
to restore it to its initial setting.
FOR A DESCRIPTION ON HOW TO USE THE OVEN, PLEASE REFER TO THE
PROGRAMMER DESCRIPTION SHEET.
STARTING THE OVEN
When the oven is connected to the power supply for the first time, or re-connected after a
power failure,
the display shows
“”
.
To start the oven:
• turn
knob 1
to
“0”
.
• press
button 3
.
The display shows “--:--”.
5019 100 55831
PRODUCT DESCRIPTION SHEET
AKZ 190
1. Selector knob: to choose the oven functions.
2. Knob to set: time of day, cooking time, the time at which cooking should terminate, the
temperatures and the power levels (Function
P
).
3. Button to select and confirm the different operations (operate by single presses only).
4. Button to select special function: “Browning” and “Heat Maintenance” .
IT