Instruction for Use
4. Connecting the Cable
• Indoor Unit
1) Open the front panel, remove the covering plate by
loosening the screw.
2) Connect the power connecting cord to the indoor
unit by connecting the wires to the terminals on the
control board individually as follows.
3) Secure the power connecting cord on the control
board with cable clamp.
4) Refit the covering plate and tighten the screw.
NOTE: (depending on the model) It is necessary to
remove the cabinet to perform connections with the
indoor unit terminal.
• Outdoor Unit
1) Remove the access door from the unit by loosening the screw. Connect the wires to the terminals on
the control board individually in accordance with the indoor unit connection.
2) Secure the power connecting cord on the control board with cable clamp.
3) Refit the access door in the original position and tighten the screw.
NOTE: (depending on the model) It is necessary to remove the cabinet to perform connections with the
indoor unit terminal.
Covering plate
Power Connection
Cable
Blue
Violet
Orange
Black
Ye ll o w
Green
Cable Clamp
Defrost Cable
Power
connection cable
Blue
Violet
Orange
Black
Ye ll o w
Green
Cable Clamp
Cable Clamp
Defrost Cable
Power
connection cable
ON/OFF 9K/12K/18K
Blue
Black
Yellow
Green
Brown
Cable
Clamp
Power
connection
cable
INVERTER 9K/12K/18K
access door
Blue
Black
Yellow-Green
Brown
Cable Clamp
Power
connection
cable
25
INVERTER 9K/12K/18K ON/OFF 9K/12K/18K