Instruções para utilização MÁQUINA DE LAVAR ROUPA Sumário PT Português,1 GB English,13 PT Instalação, 2-3 Desembalar e nivelar, 2 Ligações hidráulicas e eléctricas, 2-3 Primeiro ciclo de lavagem, 3 Dados técnicos, 3 Descrição da máquina de lavar roupa, 4-5 Painel de comandos, 4 Display, 5 Início e Programas, 6 Como iniciar um programa, 6 Tabela dos programas, 6 Personalizações, 7 AVD 88 S Regular a temperatura, 7 Regular a centrifugação, 7 Opções, 7 Detergentes e roupa, 8 Gaveta dos detergentes, 8
Instalação PT É importante guardar este manual para poder consultá-lo a qualquer momento. Se a máquina for vendida, cedida ou transferida, certifique-se que este manual permaneça com a máquina para informar o novo proprietário acerca do seu funcionamento e das respectivas advertências. Um cuidadoso nivelamento dá estabilidade à máquina e evita vibrações, ruídos e deslocamentos durante o funcionamento.
Ligação do tubo de descarga PT O cabo não deve ser dobrado nem apertado. O cabo de alimentação deve ser substituído somente por técnicos autorizados. Atenção! O fabricante declina toda a responsabilidade se estas regras não forem respeitadas. Ante de ligar a ficha na tomada eléctrica, certifiquese que: a tomada tenha uma ligação à terra e que esteja nos termos da legislação; a tomada seja compatível com a ficha da máquina de lavar roupa. Se não for, substitua a tomada ou a ficha.
Descrição da máquina de lavar roupa PT Painel de comandos Tecla do MODE Tecla da Mostrador de Programas TEMPERATURA Gaveta dos detergentes Tecla de LIGA/DESLIGA Selector Display Tecla de START/RESET Tecla de Tecla de CENTRIFUGAÇÃO SELECT Gaveta dos detergentes para carregar detergentes e aditivos (veja a pág. 8). Tecla MODE para escolher as opções de personalização (veja a pág. 7).
Display PT Durante o ciclo de lavagem serão mostrados: Descrição Depois de ter carregado na tecla START/RESET para o início do programa o display mostra o tempo que falta até ao final do ciclo. Se tiver programado a hora de início da lavagem (Delay Timer, veja a pág 7), o display indicará o tempo que falta até começar a lavagem. Instalação Além de ser um instrumento útil na programação da máquina (veja a pág. 7), o display fornece informações acerca do ciclo de lavagem e sua duração.
Início e Programas Como iniciar um programa PT 4. Coloque o detergente e os aditivos (veja a pág. 8). 5. Para iniciar o programa carregue na tecla START/ RESET. Para anular mantenha pressionada a tecla START/RESET pelo menos 2 segundos. 6. No final do programa aparece escrito END. Tire a roupa lavada de dentro e deixe a porta entreaberta para que o tambor seque. 7. Para desligar a máquina de lavar roupa, carregue . na tecla 1. Para ligar a máquina de lavar roupa, carregue na . tecla 2.
Personalizações Regular a temperatura Regular a centrifugação As várias funções de lavagem desta máquina de lavar roupa possibilitam obter a limpeza e a brancura que desejar. Para seleccionar as diversas opções deve sempre seguir o seguinte processo? Possível n os programas: Carregue em (tecla SELECT) várias vezes, até aparecer o tempo de atraso que desejar. OFF indica nenhum atraso, inícia de imediato. Todos Delay Timer Possibilita a programação do início da lavagem até 24 horas.
Detergentes e roupa PT Gaveta dos detergentes O bom resultado da lavagem depende também do uso da dose certa de detergente: com excessos não se lava melhor, e contribui-se quer para a formação de incrostações nas peças internas da máquina de lavar, quer para a poluição do meio ambiente. MAX Tire a gaveta dos detergentes e deite o detergente ou o aditivo da seguinte maneira: 4 1 2 3 Se utilizar a gaveta adicional 4 exclui-se a prélavagem.
Precauções e conselhos Segurança geral Não toque na máquina com os pés descalços nem com as mãos ou os pés molhados ou húmidos. Não abra a gaveta dos detergentes enquanto a máquina estiver a funcionar. Em nenhum caso force a porta para abri-la: poderá danificar o mecanismo de segurança que a protege contra aberturas acidentais. Verifique sempre que as crianças não se aproximem da máquina em funcionamento. Durante a lavagem a porta de vidro tende a aquecer.
Manutenção e cuidados PT Interromper a alimentação de água e de corrente eléctrica Feche a torneira da água depois de cada lavagem. Desta maneira diminuiu-se o desgaste do sistema hidráulico da máquina de lavar roupa e elimina-se o risco de inundação. Limpar a bomba Esta máquina de lavar roupa é equipada com uma bomba com limpeza automática que não precisa de operações de manutenção.
Anomalias e soluções Pode acontecer que a máquina de lavar roupa não funcione. Antes de telefonar para a Assistência Técnica (veja a pág. 12), verifique que não se trata de um problema fácil de resolver com ajuda da seguinte lista: PT Possíveis causas / Solução: A máquina de lavar roupa não liga. A ficha não está colocada na tomada eléctrica, ou não o suficiente para haver contacto. Em casa não há corrente. O ciclo de lavagem não inicia.
Assistência Antes de contactar a Assistência Técnica: Verifique se consegue resolver a anomalia (veja a pág. 11); Reinicie o programa para verificar se o inconveniente foi resolvido; Em caso negativo, contacte a assistência técnica autorizada no número de telefone indicado no certificado de garantia. Nunca recorra a técnicos não autorizados. PT Comunique: o tipo de anomalia; o modelo da máquina (Mod.); o número de série (S/N).
Instructions for use WASHING MACHINE Contents GB English GB Installation, 14-15 Unpacking and levelling, 14 Electric and water connections, 14-15 The first wash cycle, 15 Technical details, 15 Washing machine description, 16-17 Control panel, 16 Display, 17 Starting and Programmes, 18 Briefly: how to start a programme, 18 Programme table, 18 Personalisations, 19 AVD 88 S Setting the temperature, 19 Setting the spin cycle, 19 Options, 19 Detergents and laundry, 20 Detergent dispenser, 20 Bleach cycl
Installation GB Keep this instruction manual in a safe place for future reference. Should the appliance be sold, transferred or moved, make sure the instruction manual accompanies the washing machine to inform the new owner as to its operation and features. Read these instructions carefully: they contain vital information on installation, use and safety.
Do not use extensions or multiple sockets. Connecting the drain hose GB The power supply cable must never be bent or dangerously compressed. The power supply cable must only be replaced by an authorised serviceman. Installation 65 - 100 cm Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor; Warning! The company denies all liability if and when these norms are not respected.
Washing machine description Control panel GB MODE button TEMPERATURE Programme key START/STOP button Detergent dispenser button Control knob Display START/RESET button SPIN button SELECT button Detergent dispenser to add detergent and fabric softener (see page 20). MODE button to choose the options for the appliance personalisation (see page 19). Programme key to consult a straightforward chart of the different programmes available: pull the grey tab outwards to open it.
Display GB The following information is displayed during the wash cycle: Pre-wash Programmes Cycle phase under way: Spin cycle Wash cycle Rinse Description Once you have pressed the START/RESET button to start the programme, the display will indicate the amount of time left until the end of the wash cycle. If a delayed start has been set (using the Delay Timer, see page 19), the delay time will be indicated on the display.
Starting and Programmes Briefly: starting a programme GB 4. Add the detergent and any fabric softener (see page 20). 5. Start he programme by pressing the START/RESET button. To cancel it, keep the START/RESET button pressed for at least 2 seconds. 6. When the programme has ended, the word END is displayed. Take out your laundry and leave the appliance door ajar to allow the drum to dry thoroughly. 7. Turn the washing machine off by pressing button . 1. Turn the washing machine on by pressing button . 2.
Personalisations Setting the temperature Setting the spin cycle Description Press button and the maximum spin speed allowed for the programme set will be displayed. Press the same button to lower the value down to OFF, which indicates that the spin cycle has been excluded altogether (press it again to go back to the maximum value). . The spin cycle exclusion is indicated by symbol The spin cycle setting is enabled with all the programmes except for 11 and the Draining cycle.
Detergents and laundry GB Detergent dispenser Good washing results also depend on the correct dose of detergent: adding too much detergent won't necessarily make for a more efficient wash, and may in fact cause build up on the interior of your appliance and even pollute the environment. MAX Open up the detergent dispenser and pour in the detergent and fabric softener, as follows.
Precautions and advice General safety This washing machine should only be used by adults and in accordance with the instructions provided in this manual. Do not open the detergent dispenser while the appliance is in operation. Do not touch the drain water as it could reach very high temperatures. Always keep children well away from the appliance while in operation. The appliance door tends to get quite hot during the wash cycle.
Care and maintenance GB Cutting off the water or electricity supply Turn off the water tap after every wash. This will limit the wear of your appliance's water system and also prevent leaks. Unplug your appliance when cleaning it and during all maintenance operations. Cleaning your appliance The exterior and rubber parts of your appliance can be cleaned with a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
Troubleshooting Your washing machine could fail to work. Before calling for Assistance (see page 24), make sure the problem can't easily be solved by consulting the following list. GB The washing machine won't start. The appliance is not plugged into the socket, or not enough to make contact. There has been a power failure. The wash cycle won't start. The appliance door is not shut properly (the word DOOR is displayed). button has not been pressed.
Service 195039345.00 06/2003 - Xerox Business Services Before calling for Assistance: Check whether you can solve the problem on your own (see page 23); Restart the programme to check whether the problem has been solved; If this is not the case, contact an authorised Technical Service Centre on the telephone number provided on the guarantee certificate. Always request the assistance of authorised servicemen. GB Notify the operator of: the type of problem; the appliance model (Mod.