Instruction for Use

5019 312 00028
Whirlpool is a registered trademark of Whirlpool USA.
N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.
Programme
Care
Labels
Type of wash / Notes
Max.
load
kg
Detergents and additives Special Options Tempera-
ture
°C
Max.
Spin
Speed
rpm
Prewash Main
Wash
Softener Bleach Easy
Ironing
Prewash Intensive
Rinse
Rinse
Hold
Spin
Speed
Reduction
Start
Delay
White Cotton
Normally soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.
For heavily soiled laundry the additional “Prewash” option can be selected as well.
5.0
1)
Yes
❉❉❉
20 to 95 1200
Coloured
cotton
Slightly to normally soiled bed linen, table linen and underwear, towels,
shirts etc., made of cotton and linen.
5.0
1)
Yes
❉❉❉
20 to 60 1200
Synthetics
Slightly to normally soiled blouses, shirts, overalls etc. made of polyester
(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
2.0
1)
Yes
❉❉❉
2)
20 to 60
800
2)
Rapid
Slightly soiled overalls and sportswear made of cotton, polyester, polyamide
and blends with cotton.
3.0
Yes
——
❉❉❉
20 to 60 1200
Delicates Curtains and delicate clothing, dresses, skirts, shirts and blouses.
1.5
1)
Yes
——
❉❉❉
2)
20 to 40
800
2)
Silk
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. No spinning.
1.0
Yes
——
❉❉❉
20 to 30
100
3)
Wool
Only woollens with a felt-free finish, labelled with the woolmark and
identified as machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
1.0
Yes
——
❉❉
2)
20 to 40
800
2)
+
Rinse + Spin
Same as the last rinse and the final spin in the “Coloured Cotton” programme.
Programme for treating wash with starch or softener.
5.0
Yes
——
❉❉
1200
Spin
In this programme spinning is intensive. Same as the spin cycle in the
“Coloured Cotton” programme.
5.0
————
❉❉
1200
Gentle spin
In this programme spinning is gentle. Same as the spin cycle in the “Wool”
programme.
1.5
————
2)
800
2)
Drain
Drain only - no spinning. Alternative method of terminating programme after
“Rinse Hold”.
—————
——
A. Temperature Selection Buttons
B. “Programme Sequence” Indicator
C. “Start/Pause” Button
D. “End of Cycle” Indication
E. “Start Delay” Button
F. “Spin Speed Reduction” Button
When you select an option, the corresponding
indicator lights up, except if the combination of
programme, additional options and temperature
is not possible.
In this case, an audible signal sounds.
: option / Yes: dosing required
1
Do not use liquid detergents.
2
For improved garment care spin speed is restricted to
800 rpm in this programme.
3
For improved garment care spin speed is restricted to
100 rpm in this programme.
CFAB ED
AWT 7125
GB
3gb00028.fm5 Page 1 Thursday, May 10, 2001 3:35 PM
Black Process Plate

Summary of content (2 pages)