Installation Instructions
5
Tools Needed:
8" or 10" Pipe Wrench 8" or 10" Flat-Blade Screwdriver Phillips Screwdriver
Adjustable Wrench
that opens to 1"
TORX T-20
†
Security 1" Hex-Head 1⁄4" Socket Wrench Pliers (that open to 1
9
/
16
")
Screwdriver or Bit Socket Wrench
Level Utility Knife 1/4" Nut Driver 27" Wood Block
Caulk Gun and Caulk Vent Clamps Pipe-Joint Compound Putty Knife
(for installing new exhaust vent) suitable for gas type
Flashlight (optional) 1" Open-End Wrenches Ruler or Measuring Tape
INSTALLATION REQUIREMENTSINSTALLATION REQUIREMENTS
†TORX and T20 are trademarks of Acument Intellectual Properties, LLC.
Parts Supplied:
Foot Boots (4) Leveling Legs (4)
Tools and Parts
To locate factory specied replacement parts in your area,
contact the dealer from whom you purchased your dryer.